Automatic reel paper die cutting machine 970*550 for paper bowl
Main technical parameters
1. Model: FD930*550
2. Die-cutting precision : ±0.25mm
3. Rated die-cutting speed: 5000 -6500pcs / hour
4. High speed machine max die-cutting speed: 7800 tickets / hour,
low-grade machine max die-cutting speed: 7000 tickets / hour
5. Max die-cutting pressure: 120 tons
6. Max die-cutting size: 900*500mm
7. Min cutting size: 490*350mm
8. Total power of motor: 15kw
9. Host power: 7.5kw
10. dimensions: length 5000mm* width 2500mm* high 1900mm
11. Max roll diameter: 1600mm
12. Power: AC380V, 50HZ
13. Weight: 5.5 tons
The steps of operating
1. Before the machine cuts in and starts working, make sure there
are no abnormal conditions of the gas path of the electrical system
and hydraulic system.
2. Put down the upper arm first, then put the roll paper in the
middle of con top.
3. Then raise the upper arm to aim the roll paper core center and
fasten the roll, then raise roll paper for 5cm from the ground.
4. Release the traction rollers in the front and the other in the
back, hold the paper to penetrate the machine in route, then
straighten the roll paper and press the traction rollers for the
machine being ready to cuts in.
5. In the condition of no paper in the machine,it must take at
least 5min to cut no paper to hit pit every day before the machine
6. Before the machine cuts in, press the traction rollers in two
sides, adjust the pressure of putting paper, the traction roller
pressure and die-cutting pressure. The rotating pressure is
suitable when the paper tension is suitable and the pressure needs
to be adjust when the roll paper core changes.
7. Traction roller pressure is suitable during0.2-0.3mpa
8. Adjust the triplet pressure to 0.6MPa
After-sales service commitment
1, There is one year warranty period for the machine.
2, During the warranty period, the parts replacements and
maintenance services is free. But the buyer need to affords
traveling expenses,insurance and other related costs for the
3, Beyond the warranty period, all the costs about parts
replacement and machine maintenance should be paid by the buyer.
4, Please contact with us if you have any questions, we will try
our best to help you.
1. Q:Are your a trading company or manufacturer ?
A: We are a manufacturer with ten years of exporting experience.
2. Q:Where is your factory? How can I get there?
A: Our factory is located in wenzhou City, Zhejiang Province. It
takes about one hour by air from Shanghai to our city.
3. Q:Can your products be customized?
A: Most of our products can be customized, like sizes, logo,
package and so on.
4. Q . How's the delivery time ?
A: About one month.