Automatic high speed paper box cups plates die cutting machine with
The steps of operating
1. Before the machine cuts in and starts working, make sure there
are no abnormal conditions of the gas path of the electrical system
and hydraulic system.
2. Put down the upper arm first, then put the roll paper in the
middle of con top.
3.Then raise the upper arm to aim the roll paper core center and
fasten the roll, then raise roll paper for 5cm from the ground.
4. Release the traction rollers in the front and the other in the
back, hold the paper to penetrate the machine in route, then
straighten the roll paper and press the traction rollers for the
machine being ready to cuts in.
5. In the condition of no paper in the machine,it must take at
least 5min to cut no paper to hit pit every day before the machine
6. Before the machine cuts in, press the traction rollers in two
sides, adjust the pressure of putting paper, the traction roller
pressure and die-cutting pressure. The rotating pressure is
suitable when the paper tension is suitable and the pressure needs
to be adjust when the roll paper core changes.
7. Traction roller pressure is suitable during0.2-0.3mpa
8. Adjust the triplet pressure to 0.6MPa
Structure Device List
|1||Handpiece5 Components,Casting Parts||Crossbeam,Lifting Table, The movement Base, Left and Right
|2||Inter-Machine Transmission Device||Worm Gear, Worm|
|3||Chopping Board||NO.65 Manganese Steel|
|4||Automatic Form Receiving Tray|
|5||Fixing Core Loading Paper|
Electric Configuration List
|1||Main Motor Y132M-4||Lichao Shanghai|
|2||Servo Motor 4.5ACA61(with reduction gearbox)||Yaskawa Japan|
|3||Smart Sensor(Color Marks Sensor)||Sick Germany|
|4||Touch Screen DOP-BO7S200||Wilen|
|6||Traction MotorZF32-2.253||Zhibao Taiwan|
|7||Frequency Converter 7SKWVFD-B/2.2WVFD-M||Taida Taiwan|