Automatic take off paper wastage paper gaps die cutter creasing
This automatic roll paper die cutting&stripping machine which
made by ZHEJIANG FEIDA MACHINERY CO.,LTD is a production of
mechanical and electrical integration, that is made to cut the
paper after printing. Gathering sheet stacking by operating
touch-screen that is visual and convenient. Besides, and the
relevant parameters is set on the touch-screen, which shows the
function of the digital operation and working of the machine.
Main technical parameters
1. Die-cutting precision : ±0.25mm
2. Rated die-cutting speed: 5000 -6500pcs / hour
3. High speed machine max die-cutting speed: 7800 tickets /
hour,Low-grade machine max die-cutting speed: 6500 tickets / hour
4. Max die-cutting pressure: 300 tons
5. Max die-cutting size: 1350*740mm
6. Min cutting size: 540*350mm
7. Total power of motor: 40kw
8. Host power: 15kw
9. Dimensions: length 11400mm* width 5000mm* high 2600mm
10. Max roll diameter: 1600mm
11. Power: AC380V, 50HZ
12. Weight: 20 tons
Spare Parts (Within Machine For Free)
The adjustable cylinder
J solenoid valve (4V210)
Pressure reducing valve
Chint Route switch
All kinds of tracheal joint
Separated paper cylinder
Needle for stripping
8(Included Accessories)+2(Gift) Set
One more for every kind of synchronous belt
The operation of the machine
1. Make sure all the systems (electrical system, pneumatic,
hydraulic system, mechanical system, lubricating oil circuit) are
normal before starting the machine.
2. Put down the feeding arm first, then put the roll paper in the
middle of con top.
3. Then raise the feeding arm to aim the roll paper core center and
fasten the roll, then raise roll paper for 5cm from the ground.
4. Open the traction rollers in front and at the back, hold the
paper to go through the machine , then straighten the roll paper
and press the traction rollers, then the machine is ready to
5. Every day before cutting the paper , it must be take at least 10
minutes to worm up the machine without feeding.
6. Before the machine working, press the traction rollers in two
sides, adjust the roll pressure, the traction roller pressure,
paper collecting baffle and die-cutting pressure. The rotating
pressure is depends on the suitable paper tension , air pressure
needs to be adjusted when the roll paper core changes.
7. Traction roller pressure should be during0.2-0.3mpa
8. Adjust the triplet pressure to 0.6MPa
9. Before the operation of pneumatic components, always ensure that
the pneumatic system is in a state of no pressure.
After-sales service commitment
1, There is one year warranty period for the machine.
2, During the warranty period, the parts replacements and
maintenance services is free. But the buyer need to affords
traveling expenses,insurance and other related costs for the
3, Beyond the warranty period, all the costs about parts
replacement and machine maintenance should be paid by the buyer.
4, Please contact with us if you have any questions, we will try
our best to help you.
1. Q:Are your a trading company or manufacturer ?
A: We are a manufacturer with ten years of exporting experience.
2. Q:Where is your factory? How can I get there?
A: Our factory is located in wenzhou City, Zhejiang Province. It
takes about one hour by air from Shanghai to our city.
3. Q:Can your products be customized?
A: Most of our products can be customized, like sizes, logo,
package and so on.
4. Q:How's the delivery time ?
A. About one month