Automatic roll paper die cutting and stripping machine for lunch
|Die-Cutting Form||Flat Pressing and Die-Cutting, Embossing and Creasing Machine|
|Degree of Automation||Full-Automation|
|Rated Cutting Speed||90-100 sheets/minute|
|Max Cutting Speed||6000pcs/hr|
|Max Cutting Pressure||280T|
|Max Cutting Paper Size(W×L)||1070mm*610mm(W×L)|
|Min Cutting Paper Size(W×L)||490mm*350mm (W×L)|
|Max Roll Diameter||1600mm|
|Max Width of Feeding Material||1070mm|
|Suitable Paper Weight||200g-500g|
|Total Rate Of Machine||30Kw|
|Main Motor Power||11Kw|
|Overall Dimensions||Around 15m*4.5m*2.2m (L×W×H)|
|Total Weight||Around 18T|
Structure Device List
|Die Cutting Part||Stripping Part|
|1||Die Cut Part Structure||Upper Die Table (fixed table), Lower Die Table (lifting table), 2
|2||Inter-Machine Transmission Device||Worm Gear,Worm,|
4 Legs Adjust Pressure Unit
|3||Unwinding Roll Device||Unwind Shaftless(hydraulic type)||Collecting Part|
|4||Chopping Board||NO.65 Manganese Steel|
|5||Fixing Core Loading Paper|
Electric Configuration List
|Die Cutting Machine||Stripping Parts|
|No.||MOTOR MODEL||MANUFACTURERS||MOTOR MODEL||MANUFACTURERS|
|1||Main MotorY160M-4||Lichao Shanghai||7.5KW Servo Motor||Yaskawa Japan|
|2||Servo Motor 4.4ACA61||Yaskawa Japan||3KW Variable Frequency Motor||Siemens|
|3||Smart Sensor (Color Marks Sensor)||Sick Germany||1.5KW Gear Reduce Motor||Zhibao Taiwan|
|4||Touch Screen DOP-BO7S200||Wilen||Frequency Converter||Taida Taiwan|
|5||PLCDVP-16SP||Taida Taiwan||PLC||Taida Taiwan|
|6||Traction Motor ZF32-2.253||Zhibao Taiwan||Touch Screen||Wilen|
|7||Frequency Converter VFD150CH43A-21/2.2WVFD-M||Taida Taiwan||Switch||Schneider|
|8||Mainframe fly Wheel, Air Brake, Clutch||Yuyi Shanghai||Stepper Motor||Lakeside Shenzhen|
The operation of the machine
1. Make sure all the systems (electrical system, pneumatic,
hydraulic system, mechanical system, lubricating oil circuit) are
normal before starting the machine.
2. Put down the feeding arm first, then put the roll paper in the
middle of con top.
3. Then raise the feeding arm to aim the roll paper core center and
fasten the roll, then raise roll paper for 5cm from the ground.
4. Open the traction rollers in front and at the back, hold the
paper to go through the machine , then straighten the roll paper
and press the traction rollers, then the machine is ready to
5.Every day before cutting the paper , it must be take at least 10
minutes to worm up the machine without feeding.
6. Before the machine working, press the traction rollers in two
sides, adjust the roll pressure, the traction roller pressure,
paper collecting baffle and die-cutting pressure. The rotating
pressure is depends on the suitable paper tension , air pressure
needs to be adjusted when the roll paper core changes.
7. Traction roller pressure should be during0.2-0.3mpa
8. Adjust the triplet pressure to 0.6MPa
9. Before the operation of pneumatic components, always ensure that
the pneumatic system is in a state of no pressure.
After-sales service commitment
1. There is one year warranty period for the machine.
2. During the warranty period, the parts replacements and
maintenance services is free. But the buyer need to affords
traveling expenses,insurance and other related costs for the
3. Beyond the warranty period, all the costs about parts
replacement and machine maintenance should be paid by the buyer.
4. Please contact with us if you have any questions, we will try
our best to help you.