Hamburger box roll paper die cutting machine with stripping
Roll paper flat die cutting & stripping machine can be a
one-time roll paper from putting raw material to the final
product,high production efficiency,easy operation.The machine are
ideal equipment for pressed card,box,it suitable for printing and
food packaging.The FD1250*700 automatic roll paper die cutting&stripping machine which
made by ZHEJIANG FEIDA MACHINERY CO.,LTD is a production of
mechanical and electrical integration, that is made to cut the
paper after printing. Gathering sheet stacking by operating
touch-screen that is visual and convenient. Besides, and the
relevant parameters is set on the touch-screen, which shows the
function of the digital operation and working of the machine.
|Die-Cutting Form||Flat Pressing and Die-Cutting, Embossing and Creasing Machine|
|Degree of Automation||Full-Automation|
|Rated Cutting Speed||90-100 sheets/minute|
|Max Cutting Speed||6000pcs/hr|
|Max Cutting Pressure||280T|
|Max Cutting Paper Size(W×L)||1250mm*660mm(W×L)|
|Min Cutting Paper Size(W×L)||490mm*350mm (W×L)|
|Max Roll Diameter||1600mm|
|Max Width of Feeding Material||1070mm|
|Suitable Paper Weight||180g-400g|
|Total Rate Of Machine||30Kw|
|Main Motor Power||11Kw|
|Overall Dimensions||Around 11.0m*4.65m*2.0m (L×W×H)|
|Total Weight||Around 17T|
The operation of the machine
1. Make sure all the systems (electrical system, pneumatic,
hydraulic system, mechanical system, lubricating oil circuit) are
normal before starting the machine.
2. Put down the feeding arm first, then put the roll paper in the
middle of con top.
3. Then raise the feeding arm to aim the roll paper core center and
fasten the roll, then raise roll paper for 5cm from the ground.
4. Open the traction rollers in front and at the back, hold the
paper to go through the machine , then straighten the roll paper
and press the traction rollers, then the machine is ready to
5. Every day before cutting the paper , it must be take at least 10
minutes to worm up the machine without feeding.
6. Before the machine working, press the traction rollers in two
sides, adjust the roll pressure, the traction roller pressure,
paper collecting baffle and die-cutting pressure. The rotating
pressure is depends on the suitable paper tension , air pressure
needs to be adjusted when the roll paper core changes.
7. Traction roller pressure should be during0.2-0.3mpa
8. Adjust the triplet pressure to 0.6MPa
9. Before the operation of pneumatic components, always ensure that
the pneumatic system is in a state of no pressure.
After-sales service commitment
1. There is one year warranty period for the machine.
2. During the warranty period, the parts replacements and
maintenance services is free. But the buyer need to affords
traveling expenses,insurance and other related costs for the
3. Beyond the warranty period, all the costs about parts
replacement and machine maintenance should be paid by the buyer.
4. Please contact with us if you have any questions, we will try
our best to help you.